FABER® Traffic
Detection loop wire FABER® Traffic
Использование
The wire is used for detection loops in traffic light systems, speed measurements and traffic monitoring. The wires may be installed in asphalt, tar or concrete trench. The temperature of the molten compound must not exceed 200 °C.
Конструкция
| Customs Tariff Number (code number) |
85444995900000000
|
| Conductor material |
Cu/Ag
|
| Conductor construction |
fine stranded
|
| Insulation |
PTFE
|
| Permitted outer cable temperature, fixed, °C |
-190 - +260 °C
|
| Bending radius, fixed installation |
2 x Ø
|
| Bending radius, moving application |
5 x Ø
|
| Insulation resistance |
100 MOhmxkm
|
| Nominal voltage Uo |
1000 V
|
| Number of cores |
1
|
| diameter conductor |
1.63 mm
|
| Insulation wall thickness |
0.55 mm
|
| Short-circuit current (1 s) |
11.3 kA
|
| outer diameter approx. |
2.70 mm
|
| Tensile strength (during installation) |
3600 N
|
| Copper weight (GER) |
24
|
| metal base Cu |
150 EUR/100 kg
|
| net weight per 1000 |
25 kg
|
| Unit of measurement |
metre
|
Стандарты
The wire is used for detection loops in traffic light systems, speed measurements and traffic monitoring. The wires may be installed in asphalt, tar or concrete trench. The temperature of the molten compound must not exceed 200 °C.
| Артикул |
Типоразмер кабеля |
| 034727 |
FaberВ® TRAFFIC 5Y 1XAWG 14/19 1000 V RD |