EIB/KNX bus cable
Bus cable EIB/KNX
Использование
Due to the increased test voltage and the special marking the cable is designed as bus cable in the EIB/KNX facility control system according to EN 50090. For the Instabus itself is used only the red/black pair (transmission of 24 V supply voltage plus data packages), the second pair (white/yellow) is redundant. The cable may be installed on or under plaster, in ducts and installation channels in dry or wet rooms.
Конструкция
| Customs Tariff Number (code number) |
85444991000000000
|
| Conductor material |
copper, bare
|
| Conductor construction |
Class 1 = solid
|
| Insulation |
PVC TI1
|
| Stranding unit |
Pair
|
| Stranding |
Layers
|
| Screen |
plastic coated aluminium foil + solid copper drain wire
|
| Sheathing material |
PVC YM1
|
| Flame-retardant |
VDE 0482-332-1-2/IEC 60332-1-2
|
| Halogen-free |
no
|
| Permitted outer cable temperature, fixed, °C |
-30 - +70 °C
|
| Bending radius, fixed installation |
15 x Ø
|
| Specific inductivity |
0.68 mH/km
|
| Core identification |
colours acc. to VDE 0815
|
| diameter conductor |
0.8 mm
|
| metal base Cu |
100 EUR/100 kg
|
| Unit of measurement |
metre
|
Стандарты
Due to the increased test voltage and the special marking the cable is designed as bus cable in the EIB/KNX facility control system according to EN 50090. For the Instabus itself is used only the red/black pair (transmission of 24 V supply voltage plus data packages), the second pair (white/yellow) is redundant. The cable may be installed on or under plaster, in ducts and installation channels in dry or wet rooms.
| Артикул |
Типоразмер кабеля |
| 101010 |
FaberВ® EIB-Bus cable 2X2X0.8 GN |
| 101011 |
FaberВ® EIB-Bus cable 4X2X0.8 GN |